Run a Sensu cluster

A Sensu cluster is a group of at least three sensu-backend nodes, each connected to a shared etcd cluster, using Sensu’s embedded etcd or an external etcd cluster. Creating a Sensu cluster ultimately configures an etcd cluster.

Clustering improves Sensu’s availability, reliability, and durability. It will help you cope with the loss of a backend node, prevent data loss, and distribute the network load of agents.

NOTE: We recommend using a load balancer to evenly distribute agent connections across a cluster.

Configure a cluster

The sensu-backend arguments for its store mirror the etcd configuration flags, but the Sensu flags are prefixed with etcd. For more detailed descriptions of the different arguments, see the etcd docs or the Sensu backend reference.

You can configure a Sensu cluster in a couple different ways — we’ll show you a few below — but you should adhere to some etcd cluster guidelines as well:

The recommended etcd cluster size is 3, 5 or 7, which is decided by the fault tolerance requirement. A 7-member cluster can provide enough fault tolerance in most cases. While a larger cluster provides better fault tolerance, the write performance reduces since data needs to be replicated to more machines. It is recommended to have an odd number of members in a cluster. Having an odd cluster size doesn’t change the number needed for majority, but you gain a higher tolerance for failure by adding the extra member. etcd2 Admin Guide

We also recommend using stable platforms to support your etcd instances (see etcd’s supported platforms).

Docker

If you prefer to stand up your Sensu cluster within Docker containers, check out the Sensu Go Docker configuration. This configuration defines three sensu-backend containers and three sensu-agent containers.

Traditional computer instance

NOTE: The remainder of this guide describes on-disk configuration. If you are using an ephemeral computer instance, you can use sensu-backend start --help to see examples of etcd command line flags. The configuration file entries in the rest of this guide translate to sensu-backend flags.

Sensu backend configuration

The examples in this section are configuration snippets from /etc/sensu/backend.yml using a three-node cluster. The nodes are named backend-1, backend-2 and backend-3 with IP addresses 10.0.0.1, 10.0.0.2 and 10.0.0.3, respectively.

NOTE: This backend configuration assumes you have set up and installed the sensu-backend on all the nodes used in your cluster. Follow the Install Sensu guide if you have not already done this.

backend-1

##
# store configuration for backend-1/10.0.0.1
##
etcd-advertise-client-urls: "http://10.0.0.1:2379"
etcd-listen-client-urls: "http://10.0.0.1:2379"
etcd-listen-peer-urls: "http://0.0.0.0:2380"
etcd-initial-cluster: "backend-1=http://10.0.0.1:2380,backend-2=http://10.0.0.2:2380,backend-3=http://10.0.0.3:2380"
etcd-initial-advertise-peer-urls: "http://10.0.0.1:2380"
etcd-initial-cluster-state: "new"
etcd-initial-cluster-token: ""
etcd-name: "backend-1"

backend-2

##
# store configuration for backend-2/10.0.0.2
##
etcd-advertise-client-urls: "http://10.0.0.2:2379"
etcd-listen-client-urls: "http://10.0.0.2:2379"
etcd-listen-peer-urls: "http://0.0.0.0:2380"
etcd-initial-cluster: "backend-1=http://10.0.0.1:2380,backend-2=http://10.0.0.2:2380,backend-3=http://10.0.0.3:2380"
etcd-initial-advertise-peer-urls: "http://10.0.0.2:2380"
etcd-initial-cluster-state: "new"
etcd-initial-cluster-token: ""
etcd-name: "backend-2"

backend-3

##
# store configuration for backend-3/10.0.0.3
##
etcd-advertise-client-urls: "http://10.0.0.3:2379"
etcd-listen-client-urls: "http://10.0.0.3:2379"
etcd-listen-peer-urls: "http://0.0.0.0:2380"
etcd-initial-cluster: "backend-1=http://10.0.0.1:2380,backend-2=http://10.0.0.2:2380,backend-3=http://10.0.0.3:2380"
etcd-initial-advertise-peer-urls: "http://10.0.0.3:2380"
etcd-initial-cluster-state: "new"
etcd-initial-cluster-token: ""
etcd-name: "backend-3"

After you configure each node as described in these examples, start each sensu-backend:

sudo systemctl start sensu-backend
Add Sensu agents to clusters

Each Sensu agent should have the following entries in /etc/sensu/agent.yml to ensure the agent is aware of all cluster members. This allows the agent to reconnect to a working backend if the backend it is currently connected to goes into an unhealthy state.

##
# backend-url configuration for all agents connecting to cluster over ws
##

backend-url:
  - "ws://10.0.0.1:8081"
  - "ws://10.0.0.2:8081"
  - "ws://10.0.0.3:8081"

You should now have a highly available Sensu cluster! Confirm cluster health and try other cluster management commands with sensuctl.

Manage and monitor clusters with sensuctl

Sensuctl includes several commands to help you manage and monitor your cluster. Run sensuctl cluster -h for additional help information.

Get cluster health status

Get cluster health status and etcd alarm information:

sensuctl cluster health

       ID            Name                          Error                           Healthy  
────────────────── ─────────── ─────────────────────────────────────────────────── ─────────
a32e8f613b529ad4   backend-1                                                        true
c3d9f4b8d0dd1ac9   backend-2  dial tcp 10.0.0.2:2379: connect: connection refused   false
c8f63ae435a5e6bf   backend-3                                                        true

Add a cluster member

Add a new member node to an existing cluster:

sensuctl cluster member-add backend-4 https://10.0.0.4:2380

added member 2f7ae42c315f8c2d to cluster

ETCD_NAME="backend-4"
ETCD_INITIAL_CLUSTER="backend-4=https://10.0.0.4:2380,backend-1=https://10.0.0.1:2380,backend-2=https://10.0.0.2:2380,backend-3=https://10.0.0.3:2380"
ETCD_INITIAL_CLUSTER_STATE="existing"

List cluster members

List the ID, name, peer URLs, and client URLs of all nodes in a cluster:

sensuctl cluster member-list

       ID            Name             Peer URLs                Client URLs
────────────────── ─────────── ───────────────────────── ─────────────────────────
a32e8f613b529ad4   backend-1    https://10.0.0.1:2380     https://10.0.0.1:2379  
c3d9f4b8d0dd1ac9   backend-2    https://10.0.0.2:2380     https://10.0.0.2:2379
c8f63ae435a5e6bf   backend-3    https://10.0.0.3:2380     https://10.0.0.3:2379
2f7ae42c315f8c2d   backend-4    https://10.0.0.4:2380     https://10.0.0.4:2379

Remove a cluster member

Remove a faulty or decommissioned member node from a cluster:

sensuctl cluster member-remove 2f7ae42c315f8c2d

Removed member 2f7ae42c315f8c2d from cluster

Replace a faulty cluster member

To replace a faulty cluster member to restore a cluster’s health, start by running sensuctl cluster health to identify the faulty cluster member. For a faulty cluster member, the Error column will include an error message and the Healthy column will list false.

In this example, cluster member backend-4 is faulty:

sensuctl cluster health

       ID            Name                          Error                           Healthy  
────────────────── ─────────── ─────────────────────────────────────────────────── ─────────
a32e8f613b529ad4   backend-1                                                        true
c3d9f4b8d0dd1ac9   backend-2                                                        true
c8f63ae435a5e6bf   backend-3                                                        true
2f7ae42c315f8c2d   backend-4  dial tcp 10.0.0.4:2379: connect: connection refused   false

Then, delete the faulty cluster member. To continue this example, you will delete cluster member backend-4 using its ID:

sensuctl cluster member-remove 2f7ae42c315f8c2d

Removed member 2f7ae42c315f8c2d from cluster

Finally, add a newly created member to the cluster. You can use the same name and IP address as the faulty member you deleted, with one change to the configuration: specify the etcd-initial-cluster-state as existing.

etcd-advertise-client-urls: "http://10.0.0.4:2379"
etcd-listen-client-urls: "http://10.0.0.4:2379"
etcd-listen-peer-urls: "http://0.0.0.0:2380"
etcd-initial-cluster: "backend-1=http://10.0.0.1:2380,backend-2=http://10.0.0.2:2380,backend-3=http://10.0.0.3:2380,backend-4=http://10.0.0.4:2380"
etcd-initial-advertise-peer-urls: "http://10.0.0.4:2380"
etcd-initial-cluster-state: "existing"
etcd-initial-cluster-token: ""
etcd-name: "backend-4"

If replacing the faulty cluster member does not resolve the problem, see the etcd operations guide for more information.

Update a cluster member

Update the peer URLs of a member in a cluster:

sensuctl cluster member-update c8f63ae435a5e6bf https://10.0.0.4:2380

Updated member with ID c8f63ae435a5e6bf in cluster

Cluster security

See Secure Sensu for information about cluster security.

Use an external etcd cluster

To use Sensu with an external etcd cluster, you must have etcd 3.3.2 or newer. To stand up an external etcd cluster, follow etcd’s clustering guide using the same store configuration.

In this example, you will enable client-to-server and peer communication authentication using self-signed TLS certificates. To start etcd for backend-1 based on the three-node configuration example:

etcd \
--listen-client-urls "https://10.0.0.1:2379" \
--advertise-client-urls "https://10.0.0.1:2379" \
--listen-peer-urls "https://10.0.0.1:2380" \
--initial-cluster "backend-1=https://10.0.0.1:2380,backend-2=https://10.0.0.2:2380,backend-3=https://10.0.0.3:2380" \
--initial-advertise-peer-urls "https://10.0.0.1:2380" \
--initial-cluster-state "new" \
--name "backend-1" \
--trusted-ca-file=./ca.pem \
--cert-file=./backend-1.pem \
--key-file=./backend-1-key.pem \
--client-cert-auth \
--peer-trusted-ca-file=./ca.pem \
--peer-cert-file=./backend-1.pem \
--peer-key-file=./backend-1-key.pem \
--peer-client-cert-auth \
--auto-compaction-mode revision \
--auto-compaction-retention 2

NOTE: The auto-compaction-mode and auto-compaction-retention flags are important. Without these settings, your database may quickly reach etcd’s maximum database size limit.

To tell Sensu to use this external etcd data source, add the sensu-backend flag --no-embed-etcd to the original configuration, along with the path to a client certificate created using your CA:

sensu-backend start \
--etcd-trusted-ca-file=./ca.pem \
--etcd-cert-file=./client.pem \
--etcd-key-file=./client-key.pem \
--etcd-advertise-client-urls=https://10.0.0.1:2379,https://10.0.0.2:2379,https://10.0.0.3:2379 \
--no-embed-etcd

Troubleshoot clusters

Failure modes

See the etcd failure modes documentation for information about cluster failure modes.

Disaster recovery

See the etcd recovery guide for disaster recovery information.